Class II Type B Biological Safety Cabinet

Metisafe BSC Class IIB Metisafe^® Class II Type B Biological Safety Cabinets work under principles with the full exhaust of Pre/HEPA filtered fresh air to the outer atmosphere without recirculation. Exhausting through HEPA filter protects also the environment. Those Airflow principles of Class II Type B Cabinets provide safe work with biological risk level 2+/3 agents and also with cytotoxic gas & materials. The room air is pulled in through the perforations located in front of the work plate and directed to blower plenum (inflow air). This airflow direction prevents reaching dirty air to the materials over the working plate. Pre/HEPA filtered air supplied through the top of the cabinet provides the work area protecting the work zone under ISO-5 class laminar airflow. Total air in the working cabinet fully exhausted without recirculation through exhaust blower fan to the atmosphere by keeping the working area under negative air pressure. In addition to the primary air barrier accomplished in the working zone negative plenum design of the Metisafe^® cabinet prevents particle escape and zero leakage is ensured.

Main Body & Design Parameters	Antibacterial Epoxy Powder paint Coated Stainless Steel 30⁰ Openable Front panel for easy work-chamber cleaning < 7⁰ angles sloped front panel for work comfort and increased work-chamber vision Easy reachable electronic control & electrical part protection inside at front panel isolated from work-chamber UV Resistant tempered glass Aerosol-tight sash window
Microprocessor Control Unit & Display Parameters	One key touch on-off Timer setting Inflow/Downflow Air Velocity/Airflow Rate System Ready/Not-Ready message/warning Normal/Stand-by option button Automated airflow rate and velocity compensation system HEPA Filter Life (percent) Total Work-Time UV and FL Lamp Work-times Automatic Stand-by status at sash window closure Motorized sash window level position setting One key sash window Preset position Automatic UV Lamp-Off protection at the sash window opening Sash window position message Servicing records Password protected technical service key
Audio-Visual Alarm Parameters	Audible and Visual Alarms for Air Flow/Rate System ready/not-ready information Filter/Lamps replacement warning Service need warning Alarm cancel button Improper Sash window position warning
Quality and Certificates	CE Management certificate of ISO9001 Biological Safety Cabinets EN 12469 ISO 14644 Clean Room class compatibility EN61010 Electrical and Electronic safety compatibility Accredited test company validation guarantee (When installation made by Metis or by its certified technical personnel) GMP & Field performance qualification test report
Optional	Pre Filter High Capacity HEPA Filter ULPA Filter Carbon Filter Manual decontamination/fumigation A biocidal surface coating material Height adjustable support stand Key-lock protection switch Lux adjustable illumination Work-chamber Inside/Outside temperature measurement An active noise control system Foot pedal control Work chamber Hanger apparatus Heater & Microscope Assembly Base Anti-vibration weighing balance table Document / Equipment Cleaning Module Sensor integrated Sash Window safety mechanism

Internal Dimensions (WxLxH) mm		875x520x746
External Dimensions (WxLxH) mm		995x735x1600
Support Stand (WxLxH) mm		995x735x745
Support Stand Height From Ground		840 mm
Air Flow (m/s)	Inflow	0.50 ± %5
Air Flow (m/s)	Downflow	0.38 ± %5
HEPA Filter Types (EN 1822)	Main Filter	H14 HEPA, 0,3 µm particle %99.995 < filtration efficiency
	Exhaust Filter	H14 HEPA, 0,3 µm particle %99.995 < filtration efficiency
	Front Filter (EN779, Optional)	F5
Clean Area Class	EN ISO 14644	< ISO 5
Clean Area Class	US FED 209E	< Class 100
Exhaust Fan Motor Capacity		Suitable up to 10 m horizontal & 3 m vertical duct length*
Work Table	Standard	304 Stainless Steel
Work Table	Optional	316L Stainless Steel
Front Glass Aperture (mm)	Preset/Std	200cm ± 10mm
Front Glass Aperture (mm)	Max	530cm ± 10mm
Noise Level	Normal Mode	< 56 dB(A)
Noise Level	Eco (Stand by) Mode	< 50 dB(A)
Work Area Illumination (Lux)		850 – 1250 Lux
Front Glass		< 6 mm
Power consumption (kW)	Fan Filter Unit	105 W
	Illumination	50 W
	UV Lamp	30 W
Electrical socket voltage and current		220-240 VAC / 16A
Supply Voltage / Frequency /Power / Current		230 VAC / 50 Hz / 2500 W / 16A
Pack/Palette Dimensions (WxLxH) mm		1270x875x1840
Weight (kg), without support stand		190 kg

Internal Dimensions (WxLxH) mm		1250x610x675
External Dimensions (WxLxH) mm		1370x843x1700
Support Stand (WxLxH) mm		1370x843x745
Support Stand Height From Ground		840 mm
Air Flow (m/s)	Inflow	0.50 ± %5
Air Flow (m/s)	Downflow	0.38 ± %5
HEPA Filter Types (EN 1822)	Main Filter	H14 HEPA, 0,3 µm particle %99.995 < filtration efficiency
	Exhaust Filter	H14 HEPA, 0,3 µm particle %99.995 < filtration efficiency
	Front Filter (EN779, Optional)	F5
Clean Area Class	EN ISO 14644	< ISO 5
Clean Area Class	US FED 209E	< Class 100
Exhaust Fan Motor Capacity		Suitable up to 10 m horizontal & 3 m vertical duct length*
Work-Table	Standard	304 Stainless Steel
Work-Table	Optional	316L Stainless Steel
Front Glass Aperture (mm)	Preset/Std	200cm ± 10mm
Front Glass Aperture (mm)	Max	530cm ± 10mm
Noise Level	Normal Mode	< 56 dB(A)
Noise Level	Eco (Stand by) Mode	< 50 dB(A)
Work-Area Illumination (Lux)		850 – 1250 Lux
Front Glass		< 6 mm
Power consumption (kW)	Fan Filter Unit	200 W
	Illumination	50 W
	UV Lamp	30 W
Electrical socket voltage and current		220-240 VAC / 16A
Supply Voltage / Frequency /Power / Current		230 VAC / 50 Hz / 2500 W / 16A
Pack/Palette Dimensions (WxLxH) mm		1645x980x1840
Weight (kg), without support stand		220 kg

Internal Dimensions (WxLxH) mm		1480x520x746
External Dimensions (WxLxH) mm		1600x735x1590
Support Stand (WxLxH) mm		1600x735x745
Support Stand Height From Ground		840 mm
Air Flow (m/s)	Inflow	0.50 ± %5
Air Flow (m/s)	Downflow	0.38 ± %5
HEPA Filter Types (EN 1822)	Main Filter	H14 HEPA, 0,3 µm particle %99.995 < filtration efficiency
	Exhaust Filter	H14 HEPA, 0,3 µm particle %99.995 < filtration efficiency
	Front Filter (EN779, Optional)	F5
Clean Area Class	EN ISO 14644	< ISO 5
Clean Area Class	US FED 209E	< Class 100
Exhaust Fan Motor Capacity		Suitable up to 10 m horizontal & 3 m vertical duct length*
Work-Table	Standard	304 Stainless Steel
Work-Table	Optional	316L Stainless Steel
Front Glass Aperture (mm)	Preset/Std	200cm ± 10mm
Front Glass Aperture (mm)	Max	530cm ± 10mm
Noise Level	Normal Mode	< 58 dB(A)
Noise Level	Eco (Stand by) Mode	< 50 dB(A)
Work-Area Illumination (Lux)		850 – 1250 Lux
Front Glass		< 6 mm
Power consumption (kW)	Fan Filter Unit	170 W
	Illumination	50 W
	UV Lamp	30 W
Electrical socket voltage and current		220-240 VAC / 16A
Supply Voltage / Frequency /Power / Current		230 VAC / 50 Hz / 2500 W / 16A
Pack/Palette Dimensions (WxLxH) mm		1875x875x1840
Weight (kg), without support stand		260 kg

Internal Dimensions (WxLxH) mm		1785x520x746
External Dimensions (WxLxH) mm		1905x735x1590
Support Stand (WxLxH) mm		1905x735x745
Support Stand Height From Ground		840 mm
Air Flow (m/s)	Inflow	0.50 ± %5
Air Flow (m/s)	Downflow	0.38 ± %5
HEPA Filter Types (EN 1822)	Main Filter	H14 HEPA, 0,3 µm particle %99.995 < filtration efficiency
	Exhaust Filter	H14 HEPA, 0,3 µm particle %99.995 < filtration efficiency
	Front Filter (EN779, Optional)	F5
Clean Area Class	EN ISO 14644	< ISO 5
Clean Area Class	US FED 209E	< Class 100
Exhaust Fan Motor Capacity		Suitable up to 10 m horizontal & 3 m vertical duct length*
Work-Table	Standard	304 Stainless Steel
Work-Table	Optional	316L Stainless Steel
Front Glass Aperture (mm)	Preset/Std	200cm ± 10mm
Front Glass Aperture (mm)	Max	530cm ± 10mm
Noise Level	Normal Mode	< 62 dB(A)
Noise Level	Eco (Stand by) Mode	< 52 dB(A)
Work-Area Illumination (Lux)		850 – 1250 Lux
Front Glass		< 6 mm
Power consumption (kW)	Fan Filter Unit	200 W
	Illumination	50 W
	UV Lamp	30 W
Electrical socket voltage and current		220-240 VAC / 16A
Supply Voltage / Frequency /Power / Current		230 VAC / 50 Hz / 2500 W / 16A
Pack/Palette Dimensions (WxLxH) mm		2175x875x1840
Weight (kg), without support stand		310 kg