High Performance Fume Hoods - Compact Series

Metisafe High Performance Fume Hood C Series

Safe and reliable removal of chemical gases and toxic vapors arose from the indoor environment are mostly depended on optimal work performance of fume hoods. The system is designed to create a protective barrier indoor and the outside air. In such an environment protected applications exhaust fitter and/or acid scrubber units can also be used.

Metisafe^® High-Performance Fume Hoods with full exhaust and protection negative pressure air barrier is designed to protect the operator and the environment from contamination and hazardous materials. The nonturbulent air passing through the aerodynamically designed cabinet ensures optimum airflow exhaust to the atmosphere without any leakage to the indoor environment. High Performance-Low Velocity design Metisafe^® Fume Hoods are manufactured according to the EN 14175 international standards and ASHRAE-110 definitions. Sophisticated design and qualified device composition provide optimal results at field performance qualification tests.

Depending on the application and danger/risk status of work materials Metisafe^® Fume Hood production line has two category Series, selection with standard, tall, ex-proof, pathology/macroscopy, walk-in types and instrument models with four dimension ranges.

Main Body	Outer surface construction material; Corrosion Resistant Epoxy Powder paint Coated Galvanized Steel Working cabinet internal surface material; Epoxy-Polyester coated aluminum Openable front panel for easy work-chamber cleaning < 7⁰ angle back sloped front panel for work comfort and increased work-chamber vision Easy reachable electronic control and electrical part protection inside at front panel isolated from work-chamber UV Resistant tempered glass
Chemical Work Table	The highest class of chemical corrosion resistance Monoblock (sink integrated, raised sides and corners) industrial ceramic table
Chemical storage Cupboard	Corrosion Resistant Epoxy Powder paint Coated Steel/Aluminum Controlled air exhaust integrated with the main body Height adjustable shelf system
Microprocessor Control Unit and Display Parameters	One key touch on-off On-Off timer setting Inflow Air Velocity Automated air flow velocity compensation system System ready/not ready message/warning Normal/Stand-by option button Total system work Time FL Lamp work time FL lamp on-off and timer settings Automatic Stand-by status at sash window closure Motorized sash window level position setting One key sash Window preset position Servicing and maintenance records Password protected Technical Service Key
Audio-Visual Alarm Parameters	Audible and Visual Alarms for Air Flow/Rate System ready or not ready message Front glass position Motor/Sensor/Lamps replacement warning Technical Service need warning Alarm cancel button
Quality and Certificates	CE, ISO9001 Quality Management Certificate EN14175 Fume Hood Performance Certificate ASHRAE 110 Fume Hood performance tests conformity EN61010 Electrical and Electronic safety compatibility Working table acid resistance tests of DIN EN ISO 10545-13 and stain absorption tests of DIN EN ISO 10545-14 Accredited test company Validation guarantee (When installation made by Metis or by its certified technical service personnel)

Internal Dimensions (WxLxH) mm		796x688x973
External Dimensions (WxLxH) mm		1000x894x1426
Support Stand (WxLxH) mm		1000x854x775
Support Stand Height From Ground		934 mm
Face Velocity (m/s)		0.50 ± % 5
Air velocity sensor range & sensitivity		0-1.0 m/s & 0.01 m/s + 2% FS
SF6 Tracer Containment test measurement		< 0.01 ppm
Exhaust Fan Motor Capacity		Suitable up to 10 m horizontal & 3 m vertical duct length
Front Glass Aperture (mm) (Both Motorized and Manual level adjustment)	Preset/Std	400 ± 10mm
	Max	600 ± 10mm
Working Table	Stainless Steel	304 or 316L
	Industrial Ceramic	NA
Noise Level	Normal Mode	< 58 dB(A)
	Eco (Stand by) Mode	< 50 dB(A)
Working Area Illumination (Lux)		850 – 1250 Lux
Power Consumption	Exhaust Fan/Motor	370 W
	Illumination	50 W
Electrical socket voltage and frequency		220-240 VAC/16A
Supply Voltage / Frequency /Power / Current		230 VAC / 50 Hz / 2500 W / 16 A
Pack/Palette Dimensions (WxLxH) mm	Without Stand	1200x1034x1824
	With Stand/Cupboard	1200x994x1175
Weight (kg), without support stand/storage cupboard		180

Internal Dimensions (WxLxH) mm		1096x688x973
External Dimensions (WxLxH) mm		1300x894x1426
Support Stand (WxLxH) mm		1300x854x775
Support Stand Height From Ground		934 mm
Face Velocity (m/s)		0.50 ± % 5
Air velocity sensor range & sensitivity		0-1.0 m/s & 0.01 m/s + 2% FS
SF6 Tracer Containment test measurement		< 0.01 ppm
Exhaust Fan Motor Capacity		Suitable up to 10 m horizontal & 3 m vertical duct length
Front Glass Aperture (mm) (Both Motorized and Manual level adjustment)	Preset/Std	400 ± 10mm
	Max	600 ± 10mm
Working Table	Stainless Steel	304 or316L
	Industrial Ceramic	X
Noise Level	Normal Mode	< 58 dB(A)
	Eco (Stand by) Mode	< 50 dB(A)
Working Area Illumination (Lux)		850 – 1250 Lux
Power Consumption	Exhaust Fan/Motor	370 W
	Illumination	50 W
Electrical socket voltage and frequency		220-240 VAC/16A
Supply Voltage / Frequency /Power / Current		230 VAC / 50 Hz / 2500 W / 16 A
Pack/Palette Dimensions (WxLxH) mm	Without Stand	1500x1034x1824
	With Stand/Cupboard	1500x994x1175
Weight (kg), without support stand/storage cupboard		200

Internal Dimensions (WxLxH) mm		1396x688x973
External Dimensions (WxLxH) mm		1600x894x1426
Support Stand (WxLxH) mm		1600x854x775
Support Stand Height From Ground		934 mm
Face Velocity (m/s)		0.50 ± % 5
Air velocity sensor range & sensitivity		0-1.0 m/s & 0.01 m/s + 2% FS
SF6 Tracer Containment test measurement		< 0.01 ppm
Exhaust Fan Motor Capacity		Suitable up to 10 m horizontal & 3 m vertical duct length
Front Glass Aperture (mm) (Both Motorized and Manual level adjustment)	Preset/Std	400 ± 10mm
	Max	600 ± 10mm
Working Table	Stainless Steel	304 or316L
	Industrial Ceramic	X
Noise Level	Normal Mode	< 60 dB(A)
	Eco (Stand by) Mode	< 50 dB(A)
Working Area Illumination (Lux)		850 – 1250 Lux
Power Consumption	Exhaust Fan/Motor	550 W
	Illumination	50 W
Electrical socket voltage and frequency		220-240 VAC/16A
Supply Voltage / Frequency /Power / Current		230 VAC / 50 Hz / 2500 W / 16 A
Pack/Palette Dimensions (WxLxH) mm	Without Stand	1800x1034x1824
	With Stand/Cupboard	1800x994x1175
Weight (kg), without support stand/storage cupboard		230

Internal Dimensions (WxLxH) mm		1696x688x973
External Dimensions (WxLxH) mm		1900x894x1426
Support Stand (WxLxH) mm		1900x854x775
Support Stand Height From Ground		934 mm
Face Velocity (m/s)		0.50 ± % 5
Air velocity sensor range & sensitivity		0-1.0 m/s & 0.01 m/s + 2% FS
SF6 Tracer Containment test measurement		< 0.01 ppm
Exhaust Fan Motor Capacity		Suitable up to 10 m horizontal & 3 m vertical duct length
Front Glass Aperture (mm) (Both Motorized and Manual level adjustment)	Preset/Std	400 ± 10mm
	Max	600 ± 10mm
Working Table	Stainless Steel	304 or316L
	Industrial Ceramic	NA
Noise Level	Normal Mode	< 60 dB(A)
	Eco (Stand by) Mode	< 50 dB(A)
Working Area Illumination (Lux)		850 – 1250 Lux
Power Consumption	Exhaust Fan/Motor	550 W
	Illumination	50 W
Electrical socket voltage and frequency		220-240 VAC/16A
Supply Voltage / Frequency /Power / Current		230 VAC / 50 Hz / 2500 W / 16 A
Pack/Palette Dimensions (WxLxH) mm	Without Stand	2100x1034x1824
	With Stand/Cupboard	2100x994x1175
Weight (kg), without support stand/storage cupboard		270

E-Catalog

Laminar Air Flow Cabinet

Biological Safety Cabinet

High Performance Fume Hood

Isolator

Portable Air Cleaning

Containment Booth

Ceiling Type HEPA Fan System

Concept Modular Cleanroom

Modular Biosafety

Cleanroom Equipment

Accessories / Modules

High Performance Fume Hoods - Compact Series